Wednesday, October 2, 2013

Clean Steel Mesh On Dry Cleaning Presses For Smoke Damage

Fires are daily risks in the dry cleaning business, and quality cleanup is essential.

Dry cleaning presses are used for pressing clothes and getting rid of the wrinkles. When one of these machines catches on fire, it is important that you not go near the machine until the fire is extinguished. The cleanup begins after it has cooled. The steel mesh is typically made from stainless steel and can be cleaned of smoke damage quite easily if you have the right tools.


1. Unplug the press. This will help you avoid electrocution and other hazards such as combustion. Put on the rubber gloves and the safety glasses.

2. Spray the steel mesh with the metal-cleaning agent. This product can be a bit abrasive and you don't want it to eat through the metal. Allow the agent to sit for at least 10 minutes.

3. Scrub down the mesh with a wire-bristled brush. If the steel mesh is easily warped, you should use a brush with softer bristles, such as nylon.

4. Rinse the mesh using a bucket of warm water and some old cloths. Repeat as necessary.

Tags: steel mesh, mesh with